Help

Install the Voyager Kit

**Troubleshooting Your Convertible Kit**

**Also see** : re-preload instructions

for rubber shock suspension or double shock suspension
Problem 1. Things just don't go together the way you think they should. 2. Bike leans to the right or left. 3. Bike pulls tot he right or left. 4. Bike has front end shake. 5. Voyager unit is making noise. 6. Voyager ride seems too loose. 7. How do I pre-load my Voyager Kit?	Solution 1. Read and follow instructions carefully. 2. Place shims in between frame and belly bracket (for one piece brackets) or in between the 2 pieces of the belly bracket. 3. Bike and Voyager are not aligned.Loosen belly bracket and align unit. 4. Check tire pressure. Voyager tires should be filled to 20 lbs. Motorcycle tires should havenormal air pressure. Check air pressure on shocks of motorcycle. Front should have from 5 to 10 lbs. Rear should be almost at max. air pressure. Front tire could be worn or cupped or out of balance. Motorcycle front springs could be worn. Fork bearings could be loose. 5. Check and tighten all bolts. Add grease to rear bearings. Tighten jam nuts. Note: Newer bearing receivers do not have to be greased and do not have a jam nut. 6. Make sure main mounting bolts are tight. Check pre-load. 7. Click here to find out how to re-preload for rubber mount suspension or double shock suspension